Sunyani Technical University 2019/2020 Cut off Points

By | October 22, 2018

Sunyani Technical University 2019/2020 Cut off Points

Sunyani Technical University 2019/2020 Cut off Points, This cut-off point is difficult to get even from the school.According to Sunyani Technical University, cut off points are only used when a lot of people apply for a particular program.
In effect, the school does no have any standard cut-off point for applicants. The admission requirements are rather used instead of the cut of points. Students are however to take note that the cut of aggregate is aggregate 24 accumulated from three core subjects and three elective subjects relevant to the program of choice.

Sunyani Technical University Admission Requirements

DEGREE PROGRAMMES

  • Bachelor of Technology (B-Tech) Degree in Building Technology (In Collaboration with Kwame Nkrumah University of Science and Technology) (Regular and Weekend) (18 months top-up)  

Entry Requirements

  • Applicants must hold a good HND (Second Class Upper Division or Better) in Building Technology or allied programmes with at least two years relevant post HND qualification experience. Applicants with HND Second Class Lower Division must pass a selection interview before they could be considered. The programme duration is 18 months consisting of 3 semesters. 
  • To be eligible for admission to the Pre-B-Tech programme, candidates are required to have one of the following qualification:
  1. CTCIII Certificate Part III (CTCIII – New Scheme) or
  2. CTCIII Certificate Part III (CTCII – Old Scheme).
  • Bachelor of Technology (B-Tech) Degree in Accounting With Computing (Regular and Weekend) (18 months top-up)

Entry Requirements
a. HND Accountancy Applicants
Holders of HND Accountancy Certificate
b. ACCA and ICA Applicants
Applicants with 7 passes or more papers of ICAG, ACCA, CIMA or equivalents
c. Advanced Diploma in Computerised Accounting
Holders of Professional Diploma in Computerised Accounting with credit passes (SSSCE A- D), WASSCE (A1 C6) in the three core papers of English Language, Core Mathematics and Social
Studies/Integrated Science or Equivalent from a recognized Tertiary Institution
d. First Degree 
Applicants holding NAB Accredited degrees will be interviewed.  The programme duration is 18 months consisting of 3 semesters.
 

  • Bachelor of Technology (B-Tech) Degree in Procurement Management  (Regular and Weekend) (2 years top-up)

Entry Requirements
A candidate must have an HND with second class division or better and satisfy all conditions that the Technical University will require.

  1. A candidate must have an HND in Purchasing and Supply, Procurement Supply Chain Management, Logistics, Freight Forwarding, Stores Management, etc; or its equivalent.
  2. Applicants with Diploma in Procurement & Supply from the Chartered Institute of Purchasing & Supply (CIPS UK) qualification may apply.
  3. HND Graduates from other fields or disciplines with a qualification not lower than a minimum of 2nd Class Lower Division with at least five (5) years working experience in procurement related fields.
  4. First degree graduates from other fields or discipline may apply.
  • Bachelor of Technology (B-Tech) Degree in Hospitality Management (Regular and Weekend) (2 years top-up)

 
          Entry Requirements
HND graduates of Hospitality management and students transferring from similar Programmes run at other institutions with a minimum of 2nd Class Lower and must have had two years working experience, qualify to apply. Admission would be based on an interview performance.
Additionally, HND Hospitality graduates who are 30 years and above but do not satisfy the above class requirements may also apply.

  • Bachelor of Technology (B-Tech) Degree in Civil Engineering (Regular and Weekend) (2 years top-up)

 
Entry Requirements
The entry requirements for the programme is an HND (Civil Engineering) certificate or allied programmes and a minimum of two years industrial experience. Preference would be given to first and second class upper holders.

  • Bachelor of Technology (B-Tech) Degree in Management and Entrepreneurial Studies (Regular and Weekend) (2 years top-up)

 
Entry Requirements
i) Applicants must have qualification in HND Secretaryship and Management Studies, Purchasing and Supply, Accountancy or Marketing as well as students transferring from similar programmes run at other institutions with accreditation/recognition and with a minimum qualification of Second (2nd) Class Lower Division plus at least two (2) years relevant post qualification experience in the relevant field.
OR
HND Secretaryship and Management Studies, Purchasing and Supply, Accountancy, and Marketing graduates possessing lower than the minimum Second (2nd) Class Division requirement as indicated above, but have worked in relevant fields for a minimum of two (2) years may apply. Applicants in this category will be admitted based on interview performance.
OR
Other HND graduates possessing lower than the minimum Second (2nd) Class Division requirement as indicated above, but have worked in relevant fields for a minimum of two (2) years may apply. Applicants in this category will be admitted based on interview performance.

  • Bachelor of Technology (B-Tech) Degree in Marketing Management (Regular and Weekend)

(2 years top-up)
Entry Requirements

  1. Graduates of Higher National Diploma in Marketing and students transferring from similar programmes ran at other accredited/recognized institution with a minimum of second class lower division plus at least one (1) year working experience/ first degree from any recognized institution

ii.    HND graduates from other fields or disciplines with a Qualification lower than the minimum second class lower but have worked in relevant fields for at least one year

  • Bachelor of Technology (B-Tech) Degree in Electrical/Electronic Engineering (Regular and Weekend) (2 years top-up)

Entry Requirements
(i)         The B-Tech degree programme is a top-up programme designed for holders of the Higher National Diploma (HND) Certificate in Electrical and Electronic Engineering or related field. To be eligible for the B-Tech in Electrical/ Electronic Engineering programme, candidates must hold a good HND certificate (Second Class Upper Division or better) with two years relevant post-qualification experience. Candidates with second class lower division must pass a selection interview to be conducted by the Technical University in additional to two years post qualification experience in a relevant field.

  1. Electrical Technicians Course Part III or Part II old scheme holders with four (4) or three (3) credit passes including Electrical Principle, Electrical Regulations, Electrical Practical and Electrical Drawing plus four (4) G. C. E ‘O’ Level passes (English, Mathematics) and any other two subject

OR

  1. Final Electrical Technicians Course as stated above plus two (2) or more credit

passes of SSCE/WASSCE (SHS) (English and Mathematics).
Applicants admitted based on entry requirements (ii and ii) are supposed to go through some bridging course or Pre – BTech programme organized by the department and pass the stipulated courses before enrolled fully on the BTech programme.
 

  • Bachelor of Technology (B-Tech) Degree in Mechanical Engineering (Regular and Weekend)

(2 years top-up)
Entry Requirements
(i)         The B. Tech degree programme is a top-up programme designed for holders of the Higher National Diploma (HND) Certificate in Mechanical Engineering or related field. To be eligible for the B. Tech in Mechanical Engineering programme, candidates must hold a good HND certificate (Second Class Upper Division or better) with two years relevant post-qualification experience. Candidates with second class lower division must pass a selection interview to be conducted by the Technical University in addition to two years post qualification experience in a relevant field.

  1. Mechanical/Motor Technicians Course Part III or Part II old scheme holders with four (4) or three (3) credit passes in the relevant courses plus four (4) G. C. E ‘O’ Level passes (English, Mathematics) and any other two subject

OR

  1. Mechanical/Motor Technicians Course as stated above plus two (2) or more credit passes of SSCE/WASSCE (SHS) (English and Mathematics).

Applicants admitted based on entry requirements (ii and iii) are supposed to go through some bridging course or Pre – B. Tech. programme organized by the department and pass the stipulated courses before enrolled fully on the B. Tech. programme.
 

  • Bachelor of Technology (B-Tech) Degree in Agriculture (Regular and Weekend) (2 years top-up)

Entry Requirements
To be eligible for admission to the Bachelor of Technology in Agriculture programme, candidates shall obtain the following qualifications:

  1. Higher National Diploma (HND) in Agriculture or other equivalent certificate in related areas
  2. Obtain a minimum of Second Class Lower Division
  3. Worked in an agricultural industry or any other related industry for two years
  4. Pass an interview conducted by the Technical University
  5. Work experience may be waived for exceptional students with agricultural Science background and a minimum Cumulative Grade Point Average (CGPA) of 3.0 (Second Class Upper Division).

 
ADMISSION ELIGIBILITY FOR HND PROGRAMMES
Admission is opened to:

  1. SSSCE holders with credit passes (A-D) in English Language, Mathematics and Integrated Science/Social Studies plus credit passes (A-D) in Three Elective subjects relevant to the programme of study  
  2. WASSCE holders with credit passes (A1-D7)  in English Language, Mathematics and Integrated Science/Social Studies plus credit passes (A1-C6)  in Three Elective subjects relevant to  the programme of study  
  3. CERTIFICATE II HOLDERS: Certificate II Applicants with Passes in six (6) subjects comprising three (3) core subjects (English, Mathematics and Integrated Science/Social Studies) plus three (3) passes in relevant elective subjects are eligible for HND Programmes
  4. ADVANCED LEVEL holders with credit in at least Five (5) subjects at the GCE ‘O’ Level (or its equivalent) including English and Mathematics, plus at least two passes in the subjects relevant to the programme of study.
  5. TECHNICAL SCHOOLS APPLICANTS: Technical School applicants with Passes in English Language, Mathematics, Integrated Science plus three (3) relevant elective subjects.
  6. POST SECONDARY TEACHER TRAINING CERTIFICATE APPLICANTS: Passes at the final Post–Secondary Teacher Training Examination plus five passes at the GCE O’Level/SSSCE/WASSCE including English and Mathematics.
  7. DIPLOMA IN BUSINESS STUDIES (DBS)  APPLICANTS: Applicants who hold DBS with Distinction or Credit from GES accredited institutions are eligible for admission to level 200 to pursue Business related programmes at the HND level. DBS applicants who hold a Pass would enroll at level 100. In all cases applicants would be required to have four (4) credit passes in WASSCE/SSSCE/ RSA II including English and Mathematics.
  8. MATURE APPLICANTS
    1. Must be at least 25 years old.
    2. Must have at least two (2) years relevant industrial experience.
    3. Must pass a written examination and an interview.
    4. Must show proof of date of birth with any national document which is at least 5 years old at the time of application.

OR

  1. Must be at least 25 years old
  2. Must have at least two (2) years relevant industrial experience.
  3. Must show proof of credit passes in English Language and Mathematics in SSSCE/WASSCE
  4. Must show proof of date of birth with any national document which is at least 5 years old at the time of application.

MATURE CANDIDATES ENTRANCE EXAMINATION
Note: All mature candidates will be expected to pay an additional amount before the day of the entrance examination at the Technical University Campus. This amount covers the cost of the entrance examinations. Mature Candidates Entrance Examination will take place at the Sunyani Technical University.
PRE-HND (ACCESS) COURSE FOR TECHNICAL AND VOCATIONAL SCHOOL STUDENTS
The National Board for Professional and Technicians Examinations (NABPTEX) has designed an access programme for Technical/Vocational Institute graduates into HND programmes. NABPTEX will conduct a final external examination after which successful applicants shall proceed to enroll in the following HND programmes:
ENTRY REQUIREMENTS FOR PRE-HND COURSES
Applicants should posses a minimum qualification of Intermediate Certificate or its equivalent in the relevant area of study.
ACCESS PROGRAMME FOR SSSCE/WASSCE
In the case of SSSCE/WASSCE Science applicants for Access course, they must have passes in three (3) subjects comprising at least one (1) core subject plus at least one (1) science elective subject and any other science related subject.
PROFESSIONAL PROGRAMMES 
PROFESSIONAL DIPLOMA IN COMPUTERISED ACCOUNTING
Entry Requirements
Diploma in Computerised Accounting
INSTITUTE OF CHARTERED ACCOUNTANTS (ICA) GHANA – PART 1
Entry Requirements
a. SSSCE /WASSCE APPLICANTS: 6  Passes in with at least aggregate 20 and including English Language and Mathematics.
b. GBCE APPLICANTS (RSA) – Six GBCE passes including English Language, Business Mathematics, with at least aggregate 20.
THE ACCOUNTING TECHNICIANS SCHEME WEST AFRICA (ATSWA) FORMERLY GAT 
Entry Requirements for HND Programmes
  a. SSSCE /WASSCE APPLICANTS: 6  Passes in with at least aggregate 20 and including English Language and Mathematics.
b. GBCE APPLICANTS (RSA) – Six GBCE passes including English Language, Business Mathematics, with at least aggregate 20.
 
CHARTERED INSTITUTE OF BANKERS (GH) LEVEL 1 – 4  
Entry Requirements for HND Programmes
(i)         School Certificate (6 credits) or GCE ‘O” level with 6 credit in English Language and mathematics, Plus “A” level in 3 subject, 2 which should not be below grade D.
(ii)        WASSCE or SSSCE; 3 core Subjects including Core Mathematics and core English plus 3 Elective from either (1) Business Programme or (2) General Arts Programme (Economics, Government, Science & Mathematics).
(iii)       Minimum 5 Credit passes at the General Business certificate Exam including English Language and Mathematics plus 3 passes at the advanced Business Certificate Exam.
(iv)       Any other equivalent professional certificate
 
Entry Requirements for 1 – 6: Five (5) SSSCE/ WASSCE passes including English Language and Mathematics/ GBCE passes
Entry Requirements for 7 – 12 : Four (4) SSSCE/ WASSCE passes including English Language and Mathematics/ GBCE passes
Entry Requirements
Passes in Intermediate, SSSCE/WASSCE, Part I and Part II of that particular programme.
CRAFT PROGRAMMES/COUNCIL FOR TECHNICAL AND VOCATIONAL EDUCATION AND
TRAINING (COTVET) PROGRAMMES
The Technical University also runs programmes of the Council for Technical and Vocational Education and Training (COTVET) at the Certificate II and Advanced levels.
Entry Requirements

  • SSSCE/WASSCE and JHS certificates

OTHER PROGRAMMES
General Business Certificate Examination (Formerly Ghana Commercial Examinations or RSA Stage II)
Entry Requirements

  • SSSCE/WASSCE and JHS certificates

Advanced Business Certificate Examination (Formerly Ghana Commercial Examinations or RSA Stage III)
Entry Requirements

  • RSA Stage II

PROFICIENCY CERTIFICATES

  • Architectural  and Engineering Draughtmanship
  • Proficiency in Chinese Language
  • Proficiency in English  Language
  • Proficiency in French Language